{"title":"Modelmaster 4mm locomotive markings","description":null,"products":[{"product_id":"modelmaster-decals-oo-gauge-smoke-box-numbers-for-br-standard-80xxx-2-6-4t","title":"Modelmaster Decals - MMG102 (OO Gauge) Smoke Box Numbers for BR Standard 80xxx 2-6-4T","description":"\u003cp\u003ePack MMG102 contains white Smoke Box Numbers in Black Panels and matching Cabside Numbers in Gold.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53607901626741,"sku":"MMG102","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/MMG102Decalsfor80xxx2-6-4T.png?v=1731493203"},{"product_id":"modelmaster-decals-oo-gauge-smoke-box-numbers-for-ex-sr-n-n1-2-6-0","title":"Modelmaster Decals - MMG104 (OO Gauge) Steam Loco Numbers","description":"\u003cp\u003eThe two sheets of decals supplied cover general use on a variety of locomotives, but the second sheet is specifically aimed at Bachmann Locomotives.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53607905853813,"sku":"MMG104","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalsMMG104a.png?v=1731598930"},{"product_id":"modelmaster-decals-oo-gauge-smoke-box-numbers-for-ex-lner-class-j72-0-6-0t","title":"Modelmaster Decals - MMG108 (OO Gauge) Smoke Box and Loco Numbers for ex LNER Class J72 0-6-0T","description":"\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53607910277493,"sku":"MMG108","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalInfo.SheetMMG108.png?v=1731599651"},{"product_id":"modelmaster-decals-oo-gauge-smoke-box-numbers-for-ex-br-standard-73xxx-4-6-0","title":"Modelmaster Decals - MMG109 (OO Gauge) Smoke Box Numbers for ex BR Standard 73xxx 4-6-0","description":"\u003cp\u003eSmoke Box and Cab Side Numbers are both supplied on this sheet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53607916241269,"sku":"MMG109","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalInfo.SheetMMG109.png?v=1731600218"},{"product_id":"modelmaster-decals-oo-gauge-smoke-box-numbers-for-ex-lner-classes-v1-v3-2-6","title":"Modelmaster Decals - MMG112 (OO Gauge) Smoke Box Numbers for ex LNER Classes V1 \u0026 V3 2-6","description":"\u003cp\u003e15 Pairs of replacement Smoke Box and Cab Side Numbers for Bachmann Ex LNER V1\/3 2-6-2T\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53607925907829,"sku":"MMG112","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalsMMG112.png?v=1731600878"},{"product_id":"modelmaster-decals-oo-gauge-smoke-box-numbers-for-ex-lner-class-j39-0-6-0","title":"Modelmaster Decals - MMG113 (OO Gauge) Smoke Box Numbers for ex LNER Class J39 0-6-0","description":"\u003cp\u003eThis sheet contains both Smoke Box and Cab Side Numbers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53607929250165,"sku":"MMG113","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalInfo.SheetMMG113.png?v=1731601255"},{"product_id":"modelmaster-decals-oo-gauge-smoke-box-cab-side-numbers-for-15-ex-lner-class","title":"Modelmaster Decals - MMG114 (OO Gauge) Smoke Box \u0026 Cab Side Numbers for 15 ex LNER Class","description":"\u003cp\u003eThis pack contains both Smoke Box and Cab Side Numbers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53607933346165,"sku":"MMG114","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalInfo.SheetMMG114.png?v=1731601772"},{"product_id":"modelmaster-decals-oo-gauge-smoke-box-numbers-for-ex-lms-class-4f-0-6-0","title":"Modelmaster Decals - MMG115 (OO Gauge) Smoke Box Numbers for ex LMS Class 4F 0-6-0","description":"\u003cp\u003eThis pack contains Smoke Box and Cab Side Numbers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53607935902069,"sku":"MMG115","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalsMMG115.png?v=1731611190"},{"product_id":"modelmaster-decals-oo-gauge-smoke-box-numbers-for-ex-lms-class-2p-4-4-0-copy","title":"Modelmaster Decals - MMG116 (OO Gauge) Smoke Box Numbers for ex LMS Class 2P 4-4-0","description":"\u003cp\u003eThis pack contains Smoke Box and Cab Side Numbers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53607937376629,"sku":"MMG116","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalInfo.SheetMMG116.png?v=1731611734"},{"product_id":"modelmaster-decals-oo-gauge-smoke-box-numbers-for-ex-lner-class-j83-0-6-0","title":"Modelmaster Decals - MMG119 (OO Gauge) Smoke Box Numbers for ex LNER Class J83 0-6-0T","description":"\u003cp\u003eThis pack contains Smoke Box and Cab Side Numbers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53607939047797,"sku":"MMG119","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalInfo.SheetMMG119-1.png?v=1731612339"},{"product_id":"modelmaster-decals-oo-gauge-smoke-box-numbers-for-ex-lner-class-j94-0-6-0t","title":"Modelmaster Decals - MMG120 (OO Gauge) Smoke Box Numbers for ex LNER Class J94 0-6-0T","description":"\u003cp\u003eThis pack contains Smoke Box and Cab Side Numbers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53607940522357,"sku":"MMG120","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalsMMG120.png?v=1731612690"},{"product_id":"modelmaster-decals-oo-gauge-smoke-box-numbers-for-ex-sr-q1-class-0-6-0","title":"Modelmaster Decals - MMG121 (OO Gauge) Smoke Box Numbers for ex SR Q1 Class 0-6-0","description":"\u003cp\u003eThis pack contains Smoke Box and Cab Side Numbers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53607941341557,"sku":"MMG121","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalsMMG121.png?v=1731613037"},{"product_id":"modelmaster-decals-oo-gauge-smoke-box-numbers-for-br-standard-92xxx-2-10-0","title":"Modelmaster Decals - MMG122 (OO Gauge) Smoke Box Numbers for BR Standard Class 9F 2-10-0","description":"\u003cp\u003eThis pack contains Smoke Box and Cab Side Numbers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53607942947189,"sku":"MMG122","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalInfo.SheetMMG122.png?v=1731613840"},{"product_id":"modelmaster-decals-oo-gauge-smoke-box-numbers-for-hornby-ex-cr-lyr-0-4-0-sts","title":"Modelmaster Decals - MMG123 (OO Gauge) Smoke Box Numbers for Hornby ex CR \u0026 LYR 0-4-0 STs","description":"\u003cp\u003eThis pack contains Smoke Box and Cab Side Numbers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53607944028533,"sku":"MMG123","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalsMMG123.png?v=1731614126"},{"product_id":"modelmaster-decals-oo-gauge-smoke-box-numbers-for-ex-lms-48xxx-2-8-0","title":"Modelmaster Decals - MMG126 (OO Gauge) Smoke Box Numbers for ex LMS 48xxx 2-8-0","description":"\u003cp\u003eThis pack contains Smoke Box and Cab Side Numbers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53607944913269,"sku":"MMG126","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalInfo.SheetMMG126.png?v=1731614532"},{"product_id":"modelmaster-decals-oo-gauge-smoke-box-numbers-for-ex-lner-v2-2-6-2","title":"Modelmaster Decals - MMG130 (OO Gauge) Smoke Box Numbers for ex LNER V2 2-6-2","description":"\u003cp\u003eThis pack contains Smoke Box and Cab Side Numbers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53607946748277,"sku":"MMG130","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalInfo.SheetMMG130.png?v=1731615417"},{"product_id":"modelmaster-decals-oo-gauge-smoke-box-numbers-for-ex-lms-class-4mt-2-6-0","title":"Modelmaster Decals - MMG131 (OO Gauge) Smoke Box Numbers for ex LMS Class 4MT 2-6-0","description":"\u003cp\u003eThis pack contains Smoke Box and Cab Side Numbers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53607947501941,"sku":"MMG131","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalInfo.SheetMMG131.png?v=1731615997"},{"product_id":"modelmaster-decals-oo-gauge-smoke-box-numbers-for-ex-sr-m7-0-4-4-t","title":"Modelmaster Decals - MMG133 (OO Gauge) Smoke Box Numbers for ex SR M7 0-4-4-T","description":"\u003cp\u003eThis pack contains Smoke Box and Cab Side Numbers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53607948812661,"sku":"MMG133","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalInfo.SheetMMG133.png?v=1731616525"},{"product_id":"modelmaster-decals-oo-gauge-smoke-box-numbers-for-br-standard-class-76xxx-4-6-0","title":"Modelmaster Decals - MMG134 (OO Gauge) Smoke Box Numbers for BR Standard Class 76xxx 4-6-0","description":"\u003cp\u003eThis pack contains Smoke Box and Cab Side Numbers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53607949926773,"sku":"MMG134","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalInfo.SheetMMG134.png?v=1731617226"},{"product_id":"modelmaster-decals-oo-gauge-br-black-double-arrows","title":"Modelmaster Decals - MMG405 (OO Gauge) BR Black Double Arrows","description":"\u003cp\u003eThis pack contains BR Double Arrow Logos in 3 sizes, with 12 of each size per sheet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53607953596789,"sku":"MMG405","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalInfo.SheetMMG405.png?v=1731944641"},{"product_id":"modelmaster-decals-oo-gauge-smoke-box-numbers-for-ex-lner-class-b1-4-6-0","title":"Modelmaster Decals - MMG802 (OO Gauge) Smoke Box Numbers for ex LNER Class B1 4-6-0","description":"\u003cp\u003eThis pack contains Smoke Box and Cab Side Numbers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53607954776437,"sku":"MMG802","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalInfo.SheetMMg802.png?v=1731634469"},{"product_id":"modelmaster-decals-oo-gauge-smoke-box-cab-side-numbers-including-spares-for-e","title":"Modelmaster Decals - MMG804 (OO Gauge) Smoke Box \u0026 Cab Side Numbers for Ex LSWR T9 4-4-0","description":"\u003cp\u003eThis pack contains Smoke Box and Cab Side Numbers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53607961985397,"sku":"MMG804","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalInfo.SheetMMG804.png?v=1731633915"},{"product_id":"modelmaster-decals-oo-gauge-smoke-box-numbers-for-ex-lner-k3-2-6-0","title":"Modelmaster Decals - MMG814 (OO Gauge) Smoke Box Numbers for ex LNER K3 2-6-0","description":"\u003cp\u003eThis pack contains Smoke Box and Cab Side Numbers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53607975223669,"sku":"MMG814","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalInfo.SheetMMG814.png?v=1731627817"},{"product_id":"modelmaster-decals-oo-gauge-smoke-box-numbers-for-standard-class-2-6-2t","title":"Modelmaster Decals - MMG813 (OO Gauge) Smoke Box Numbers for Ex LNER V2 Class 2-6-2T","description":"\u003cp\u003eThis pack contains Smoke Box and Cab Side Numbers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53607976010101,"sku":"MMG813","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalInfo.SheetMMG813.png?v=1731628627"},{"product_id":"modelmaster-decals-oo-gauge-smoke-box-numbers-for-standard-class-4-4-6-0","title":"Modelmaster Decals - MMG818 (OO Gauge) Smoke Box Numbers for Standard Class 4 (4-6-0)","description":"\u003cp\u003eThis pack contains Smoke Box and Cab Side Numbers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53607979843957,"sku":"MMG818","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalInfo.SheetMMG818.png?v=1731626310"},{"product_id":"modelmaster-decals-oo-gauge-smoke-box-numbers-for-standard-class-4-2-6-4t","title":"Modelmaster Decals - MMG816 (OO Gauge) Smoke Box Numbers for BR Class 3MT 2-6-2T","description":"\u003cp\u003eThis pack contains Smoke Box and Cab Side Numbers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53607980728693,"sku":"MMG816","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalInfo.SheetMMG816.png?v=1731627047"},{"product_id":"modelmaster-decals-oo-gauge-smoke-box-numbers-for-ex-lms-class-3f-0-6-0t","title":"Modelmaster Decals - MMG809 (OO Gauge) Smoke Box Numbers for ex Midland Class 3F 0-6-0","description":"\u003cp\u003eThis pack contains Smoke Box and Cab Side Numbers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53607981941109,"sku":"MMG809","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalInfo.SheetMMG809.png?v=1731631298"},{"product_id":"modelmaster-decals-oo-gauge-smoke-box-numbers-for-ex-lms-class-8f-2-8-0","title":"Modelmaster Decals - MMG831 (OO Gauge) Smoke Box Numbers for ex LMS Class 8F 2-8-0","description":"\u003cp\u003eThis pack contains Smoke Box and Cab Side Numbers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53607983284597,"sku":"MMG831","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalInfo.SheetMMG831.png?v=1731623417"},{"product_id":"modelmaster-decals-oo-gauge-smoke-box-numbers-for-ex-lner-j94-0-6-0t","title":"Modelmaster Decals - MMG840 (OO Gauge) Smoke Box Numbers for ex LNER J72 0-6-0T","description":"\u003cp\u003eThis pack contains Smoke Box and Cab Side Numbers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53607986168181,"sku":"MMG840","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalInfo.SheetMMG840.png?v=1731619564"},{"product_id":"modelmaster-decals-oo-gauge-smoke-box-numbers-for-ex-lner-n2-0-6-2t","title":"Modelmaster Decals - MMG833 (OO Gauge) Smoke Box Numbers for ex LNER N2 0-6-2T","description":"\u003cp\u003eThis pack contains Smoke Box and Cab Side Numbers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53607987413365,"sku":"MMG833","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalInfo.SheetMMG833.png?v=1731622229"},{"product_id":"modelmaster-decals-oo-gauge-smoke-box-numbers-for-ex-lner-b12-3-4-6-0","title":"Modelmaster Decals - MMG836 (OO Gauge) Smoke Box Numbers for ex LNER B12\/3 (4-6-0)","description":"\u003cp\u003eThis pack contains Smoke Box and Cab Side Numbers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53607988232565,"sku":"MMG836","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalInfo.SheetMMG836.png?v=1731621561"},{"product_id":"modelmaster-decals-oo-gauge-smoke-box-numbers-for-ex-lms-class-4f-0-6-1","title":"Modelmaster Decals - MMG838 (OO Gauge) Smoke Box Numbers for ex LMS Class 4F 0-6-0","description":"\u003cp\u003eThis pack contains Smoke Box and Cab Side Numbers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53607990067573,"sku":"MMG838","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalInfo.SheetMMG838.png?v=1731620912"},{"product_id":"modelmaster-decals-oo-gauge-smoke-box-numbers-for-ex-sr-class-n-n1-2-6-0","title":"Modelmaster Decals - MMG839 (OO Gauge) Smoke Box Numbers for ex SR Class N, N1 (2-6-0)","description":"\u003cp\u003eThis pack contains Smoke Box and Cab Side Numbers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53607990591861,"sku":"MMG839","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalInfo.SheetMMG839.png?v=1731620270"},{"product_id":"modelmaster-decals-oo-gauge-br-cabside-numbers-for-all-br-numbered-locos-on-t","title":"Modelmaster Decals - MMG899 (OO Gauge) BR Cabside Numbers for all BR Numbered Locos on T","description":"\u003cp\u003eThis pack contains Cab Side Numbers for all 31 BR Isle of Wight Locos.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53607992951157,"sku":"MMG899","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalInfo.SheetMMG899.png?v=1731618823"},{"product_id":"modelmaster-decals-mm832-oo-gauge-smoke-box-numbers-for-ex-lner-j94-0-6-2st","title":"Modelmaster Decals - MMG832 (OO Gauge) Smoke Box Numbers for ex LNER J94 0-6-2ST","description":"\u003cp\u003eThis pack contains Smoke Box and Cab Side Numbers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53625185403253,"sku":"MMG832","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalInfo.SheetMMG832.png?v=1731622826"},{"product_id":"modelmaster-decals-mmg825-oo-gauge-smoke-box-numbers-for-ex-lms-class-3f-0-6-0t","title":"Modelmaster Decals - MMG825 (OO Gauge) Smoke Box Numbers for ex LMS Class 3F 0-6-0T","description":"\u003cp\u003eThis pack contains Smoke Box and Cab Side Numbers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53625200116085,"sku":"MMG825","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalinfo.SheetMMG825.png?v=1731624576"},{"product_id":"modelmaster-decals-mmg820-oo-gauge-smoke-box-numbers-for-br-4mt-2-6-4t","title":"Modelmaster Decals - MMG820 (OO Gauge) Smoke Box Numbers for BR 4MT 2-6-4T","description":"\u003cp\u003eThis pack contains Smoke Box and Cab Side Numbers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53625206735221,"sku":"MMG820","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalInfo.SheetMMG820.png?v=1731625491"},{"product_id":"modelmaster-decals-mmg812-oo-gauge-smoke-box-numbers-for-ex-lner-j83-0-6-0t","title":"Modelmaster Decals - MMG812 (OO Gauge) Smoke Box Numbers for Ex LNER J83 0-6-0T","description":"\u003cp\u003eThis pack contains Smoke Box and Cab Side Numbers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53625262244213,"sku":"MMG812","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalInfo.SheetMMG812.png?v=1731629649"},{"product_id":"modelmaster-decals-mmg810-oo-gauge-smoke-box-numbers-for-ex-lms-2mt-2-6-0t","title":"Modelmaster Decals - MMG810 (OO Gauge) Smoke Box Numbers for Ex LMS 2MT 2-6-0T","description":"\u003cp\u003eThis pack contains Smoke Box and Cab Side Numbers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53625275908469,"sku":"MMG810","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalInfo.SheetMMG810.png?v=1731630422"},{"product_id":"modelmaster-decals-mmg808-oo-gauge-smoke-box-numbers-for-ex-secr-c-0-6-0-copy","title":"Modelmaster Decals - MMG808 (OO Gauge) Smoke Box Numbers for Ex SECR C 0-6-0","description":"\u003cp\u003eThis pack contains Smoke Box and Cab Side Numbers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53625309954421,"sku":"MMG808","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalInfo.SheetMMG808.png?v=1731631992"},{"product_id":"modelmaster-decals-mmg807-oo-gauge-smoke-box-numbers-for-ex-gcr-o4-2-8-0","title":"Modelmaster Decals - MMG807 (OO Gauge) Smoke Box Numbers for Ex GCR O4 2-8-0","description":"\u003cp\u003eThis pack contains Smoke Box and Cab Side Numbers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53625333055861,"sku":"MMG807","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalsInfo.SheetMMG807.png?v=1731632732"},{"product_id":"modelmaster-decals-mmg806-oo-gauge-smoke-box-cab-side-numbers-for-ex-lner-l1-2-6-4t","title":"Modelmaster Decals - MMG806 (OO Gauge) Smoke Box \u0026 Cab Side Numbers for Ex LNER L1 2-6-4T","description":"\u003cp\u003eThis pack contains Smoke Box and Cab Side Numbers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":53625348555125,"sku":"MMG806","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalInfo.SheetMMG806.png?v=1731633385"},{"product_id":"modelmaster-decals-mmg402oo-gauge-br-locomotive-emblems-1956-68","title":"Modelmaster Decals - MMG402 (OO Gauge) BR Locomotive Emblems 1956-68","description":"\u003cp\u003eThis pack contains BR Locomotive Emblems for the Era of 1956-68, (4 pairs of each set). \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide Decal Fixing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak decal in water for about 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen design releases itself on backing paper, slide it off face upwards on to the model. DO NOT ALLOW IT TO FLOAT OFF BACKING PAPER.\u003c\/li\u003e\n\u003cli\u003eAfter final positioning, press well down, wiping from centre outwards to squeeze out surplus water and air bubbles.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFor decals with Removable Varnish Cover Coating\u003c\/strong\u003e :- we recommend that you leave the cover coat on small decals, but for larger decals it is possible to PEEL AWAY the Varnish Cover Coat to leave a factory type finish.\u003c\/p\u003e\n\u003cp\u003eTo do this successfully, the decal must be applied to a smooth, glossy surface, and allowed to dry for at least 48 hours, before removing the film by applying a Low Tack Masking Tape to a corner of the varnish on the decal, and GENTLY pulling the varnish panel away. However, because of the thinness and clarity of the varnish, it is not critical to remove it - you will still be left with a superb, non yellowing, finish which will do justice to your model.\u003c\/p\u003e","brand":"Modelmaster","offers":[{"title":"Default Title","offer_id":54858021077365,"sku":"MMG402","price":3.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0275\/5932\/9844\/files\/ModelmasterDecalInfo.SheetMMG402.png?v=1791579808"}],"url":"https:\/\/malcsmodels.co.uk\/collections\/modelmaster-4mm-locomotive-markings.oembed","provider":"Malcs Models","version":"1.0","type":"link"}